Access control turnstile flap barrier gate rfid card QR code and face recognition Optional
Parameters:
| Size |
1400mm*300mm*1000mm |
| Material |
304 Stainless steel, 1.5-2.0 mm thickness |
| Arm material |
Acrylic 10mm thickness |
| Motor type |
DC motor |
| Lane width |
550-850mm (can be customized) |
| Net weight |
70kg/unit |
| MCBF |
>10.000.000 times |
| Signal |
Dry contract |
| IR sensor |
6 pairs |
| Access speed |
40 people/min |
| Open/Close speed |
0.2sec |
| Automatic reset time after failure |
5sec (adjustable) |
| Working environment |
Indoor / Outdoor (Under shelter) |
| Temperature |
-25℃ --70℃ |
| Relative humidity |
<90% no condensation |
1. Solid material:
304 stainless steel, Appearance design, generous, beautiful, humanized design. Appearance can be custmized;
2. High perfermance:
High-performance integrated control panel, strong anti-interference ability, Stability System ,
Drive module does not heat, Low power consumption;
3.By small buttons on SRU, can set the device's operating status;
4. Anti Pinch, anti bumps function:
When obstacles encountered in the process of arm resetting, motor stops or open again;
5. Scour protection function:
When the open signal is not received, arm will be locked after 5 degrees rotation ;
6. Automatic reset function:
After turnstile opened, if no pass in a specified period of time, it will automatically cancel the access privileges of users;
7. Data collect function:
Users can be set using the key board according to their needs;.
8. Audible alarm function:
Including unlawful entry, trailing alarm;
9. Infrared sensors:
6 to 10 pairs of infrared sensors to detect the trailing and anti pinch;
Optional Access control methods:
RFID Card, QR code. Face Recognition.ESD Tester. Tickets.
